1. <code id="7asms"></code>

      <big id="7asms"><em id="7asms"><track id="7asms"></track></em></big>
    2. <code id="7asms"><nobr id="7asms"><sub id="7asms"></sub></nobr></code>
    3. <code id="7asms"></code>
      <strike id="7asms"></strike>
      <tr id="7asms"></tr>
    4. 福州高特光电科技有限公司

      KTP (KTiOPO4) is a nonlinear optical crystal, which possesses excellent nonlinear and electro-optic properties.It has large nonlinear optical coefficients and wide angular bandwidth and small walk-off angle,etc.which make it suitable for various nonlinear frequency conversion and wave guide online_ordering.

      Due to very high effective nonlinearity (d eff ~8.3xd 36 (KDP)at 1.06μ m) and excellent optical properties,KTP perfectly suits as lasing material in various online_orderings .The phase matching range of KTP crystal lies in 0.99-3.3 μ m region .This allows us to use KTP as an intracavity and extracavity frequency double for the most commonly used lasers,such as Nd:YAG,Nd:Glass and Nd:YLF

      Capabilities :
       

      1)
      Aperture:1x1 ~ 10x10mm
      2)
      Length: 0.05 ~ 20mm
      3)
      Phase Matching Angle:
      Determined by different homonic generartion
      typical θ=90°; φ=23.5° for SHG 1064nm
      4)
      Phase matching type:Type II
      5)
      Typical Coating:
      a) AR @1064nm R<0.1%; AR @ 532nm, R<0.25%.
      b) HR @1064nm, R>99.8%; HT @808nm, T<0.5%
      Different coating specification upon customer request.

       

      Typical Specification and Tolerance:
      1)
      Angle tolerance: Δθ< ± 0.2°; Δφ< ±0.2°
      2)
      Dimension tolerance: (W ± 0.1mm) x (H ± 0.1mm) x (L + 0.2mm/-0.1mm)
      3)
      Flatness: λ/8 @ 633nm
      4)
      Scratch/Dig code: better than 10/5 Scracth/dig per MIL-O-13830A
      5)
      Parallelism: < 20 arc seconds
      6)
      Perpendicularity:< 5 arc minutes
      7)
      Wavefront distortion: < λ/8 @ 633nm
      8)
      Clear aperture: > 90% central area

      Physical and Optical Properties

      Crystal structure Orthorhombic, point group mm 2
      Melting point 1172°C incongruent
      Cell parameters a=6.404?, b=10.616?, c=12.814?, Z=8
      Curie point 936°C
      Mohs hardness ~5
      Density 3.01 g/cm 3
      Color colorless
      Hygroscopic susceptibility no
      Specific heat 0.1643 cal/g.°C
      Thermal conductivity 0.13 W/cm/°K
      Electrical conductivity 3.5x10 -8 s/cm (c-axis, 22°C, 1KHz)

      Transmitting Range 350nm~4500nm
          nx ny nz
      Refractive Indices 1064nm 1.7377 1.7453 1.8297
        532nm 1.7780 1.7886 1.8887
      Absorption Coefficients α < 1% / cm @ 1.064 μm    
      Phase Matchable Range 0.984-3.4μm      
      Therm-Optic dnx / dT= 1.1x10 /°C,dny / dT= 1.3x10 /°C,dnz / dT=1.6x10 /°C
      Coefficients        
      Nonlinear d31=2.54pm/V, d32=1.35pm/V, d33=16.9pm/V
      Optical Coefficients d24=3.64pm/V, d15=1.91pm/V, at 1.064μm
        deff(II) (d24-d15)sin2Φsin2θ-(d10sin Φ+d24cos Φ)sinθ
          Low frequency High frequency
          (pm/V)   (pm/V)
      Electro-Optic r13 9.5   8.8
      Coefficients r23 15.7   13.8
        r33 36.3   35.0
        r51 7.3   6.9
        r42 9.3   8.8
      Dielectric Constant εeff=13      
        nx = 3.0065 + 0.03901/(λ - 0.04251) - 0.01327λ
      Sellmeier Equations ny = 3.0333 + 0.04154/(λ - 0.04547) - 0.01408λ
        nz = 3.3134 + 0.05694/(λ - 0.05658) - 0.01682λ

      Notes:

      1.To inquiry or order a finished KTP crystals, please specify the specification listed above, we kindly request engineering drawing to specify orientation, Please consult us for the designs if you're sure about the phase matching angle for others' special online_ordering.
      2.For information of handling and Mark of Mark of KTP.

       

       

      call us
      Email Us
      Copyright 2011, fzgaote.com, All Rights Reserved.create by 福州网站建设
      首页-优德w88体育app